On site

Raghwat Al Janoub Maintenance and Cleaning

Chandelier cleaning in Al Shumaisi, Riyadh

Al Shumaisi is a historic quarter in south-central Riyadh, the original home of King Saud Medical City before it became Riyadh's first hospital. Buildings cluster close together, streets are narrow, and the character is deliberately preserved as it was. Heavy traffic on nearby Al Bathaa Road brings grey dust, and the tight passages trap moisture. We dismantle with extreme care, wash deep into every surface, restore the metal, and reinstall safely in its original position.

Why chandeliers need specialist cleaning

  • Photographed before dismantling

    We photograph the exact arrangement before a single drop comes off, so every piece returns to its original spot.

  • Washing that reaches the gaps

    Each crystal is taken down and washed on its own with a residue-free solution, not smeared over while dust stays trapped between the drops.

  • Power and height handled safely

    We cut the power at the board and cover the floor beneath before anyone touches the fitting, then work from a ladder or scaffold matched to the ceiling.

  • A wiring check built in

    While the fitting is apart we inspect the lamps and connections and tighten anything that has worked loose.

Why the job is different in Al Shumaisi

Shumaisi chandeliers are affected by both traffic grime and trapped moisture simultaneously, because narrow streets between old buildings prevent air circulation and allow dust and dampness to linger. The whole method is set out in the details of our chandelier cleaning service.

  • Buildings clustered tight with narrow streets

    Al Shumaisi differs from other central Riyadh quarters because its buildings are pressed close together, streets are tighter still, and gaps between walls do not permit air to move. Fittings in these old buildings are surrounded by aged walls, aged wiring and porous brick.

  • Al Bathaa Road traffic and trapped exhaust

    Major Al Bathaa Road runs directly beside Al Shumaisi and carries heavy constant traffic. Narrow Shumaisi streets do not allow air to carry dust away, instead dust and exhaust hang suspended and fall onto the fittings.

  • Moisture, mould and scale in old construction

    Al Shumaisi buildings are very old and sit on damp foundations. Moisture seeps through walls and ceilings, creating persistently damp conditions inside flats. This environment deposits scale on crystal and wiring, and can grow white mould on metal surfaces.

What's Included

Al Shumaisi is an old densely-built quarter with close-set buildings and narrow streets, and proximity to major Al Bathaa Road means constant exposure to vehicle exhaust and fine dust that penetrates every crevice.

  • Power off, area secured

    We disconnect at the main flat circuit board, then test the fitting with sensitive detection equipment, because very old wiring may be in unknown condition.

  • The arrangement photographed before dismantling

    We photograph the fitting and all connections carefully before dismantling, noting non-standard wire colours and old-fashioned connection methods.

  • Crystal pieces washed

    We wash crystal with extreme caution because old crystal can be brittle and break easily, using only the softest brush, warm water and fine salt.

  • Metal frame polished

    We polish metal gently and may find cracked or severely damaged metal parts that cannot safely tolerate cleaning, and we will recommend replacement or repair before reinstallation.

  • Lamps and connections checked

    We inspect every connector and wire for rust, burns, severe corrosion and electrical weakness, and strongly recommend replacement of any unsafe components.

  • Reassembled exactly as it was

    We reinstall carefully in the original position, test multiple times, and advise you of all issues found and solutions proposed.

Al Shumaisi on the map

Al Shumaisi sits about 1 km from Al Jaradiyah and about 1 km from Umm Sulaim.

Open in Google Maps

How we work

Call and survey

Secure and dismantle

Wash and polish

Refit and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

What is different about Central Riyadh

Central Riyadh is the oldest and busiest part of the city. Olaya and Sulaimaniyah carry the office towers along King Fahd Road and Tahlia Street, including Kingdom Centre and Al Faisaliah, while Al Malaz, Al Murabba, Al Batha and Al Dirah are older apartment blocks with shops on the ground floor, the Masmak quarter and the markets around Qasr Al Hukm. Heavy traffic on the main roads coats glass and shopfronts in a grey exhaust film, older stairwells and tiled corridors show worn grout and scale from the hard water, and the commercial buildings never stop taking footfall.

Nearby districts we cover

Questions before booking

Why is Al Shumaisi hit first by both dust storms and trapped moisture?

Narrow streets and tightly clustered buildings trap air and prevent circulation, so dust storms and humidity waves linger here longer than elsewhere. Chandeliers bear the brunt of this trapped environment.

Are Al Shumaisi chandeliers older and more corroded than in other areas?

Many fittings here are as old as the buildings themselves, some dating to the 1960s or 1970s. Very old wiring and connections require special careful testing before we reinstall.

Can sand and dust entry to the flat be prevented to keep the fitting cleaner?

With narrow streets and clustered buildings, preventing dust completely is very difficult. Old doors and windows may not seal tightly. Regular chandelier cleaning is the most practical solution.

Are deposits on the fitting from desert sand or from the constant moisture?

Usually both together, because dust falls and moisture binds it to the surface, creating a hard layer on crystal and metal that is difficult to remove completely.

Should we clean the fixture immediately after a heavy dust storm?

Yes, cleaning soon after a major dust event is best, because fine dust can harden on the surface over time. Delay makes the job harder.

Do very old electrical wires in Al Shumaisi need especially careful inspection?

Definitely. Very old wiring may be damaged or corroded by moisture and dust. We inspect every wire carefully and advise you if replacement is needed before we reinstall.

How much does chandelier cleaning in Al Shumaisi cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Shumaisi.

Need chandelier cleaning in Al Shumaisi? Tell us about the place and we will tell you what it needs

We reach Al Shumaisi at a time we agree, and you get the full cost before we start.

Call WhatsApp