Call us
On site

Raghwat Al Janoub Maintenance and Cleaning

Factory and warehouse cleaning in Al Sinaiyah Al Qadimah, Riyadh

Al Sinaiyah Al Qadimah is a true industrial zone in east-central Riyadh devoted entirely to workshops and warehouses, including metalworking, car repair and storage, with wide streets designed for heavy truck traffic. Dust here is heavier and more varied than in mixed areas, holding metal particles and debris from truck-graded roads, needing specialized handling. Cleaning equipment here must be more powerful and work often, because continuous industrial activity brings dust back quickly.

Call us WhatsApp

Why a scheduled clean pays off

  • Less unplanned machine downtime

    Dust that builds up on machinery works into bearings and moving parts and brings failures forward.

  • Lower fire risk overhead

    The layer of dust and oil that gathers on high gantries and pipework is a real fire load sitting above your people.

  • A floor that takes heavy traffic

    Warehouse floors pick up forklift tyre marks and spilt oil that ordinary mopping only smears around.

  • Cleaner stock and easier stock-takes

    Dust that settles on high racking drifts down onto the cartons and goods stored beneath it.

Why the job is different in Al Sinaiyah Al Qadimah

Workshops in Al Sinaiyah Al Qadimah collect daily metal dust from cutting, welding and vehicle repair operations, with debris buildup on floors that needs regular removal. The whole method is set out in our factory and warehouse cleaning guide.

  • Metal and welding shops next to storage warehouses

    Al Sinaiyah Al Qadimah is given over to heavy activities like metal processing, welding and vehicle repair, so fine metal dust flies from these operations and settles directly on warehouse floors and shelving nearby.

  • Wide roads built for heavy truck movement

    Roads here are wide and made for heavy commercial and truck traffic, so asphalt wears faster and generates coarse particles. Dust from heavy engines stays suspended in the air longer.

  • Industrial activity running all day

    Workshops in Al Sinaiyah Al Qadimah work hard all day, so dust is made continuously. Even if floors are cleaned in the morning, they fill again with dust and debris by evening.

What's Included

Al Sinaiyah Al Qadimah lies between King Faisal Road and the ring road, with wide streets built for heavy truck movement bringing coarse dust and metal debris that enters workshops and warehouses through open doors and large window openings.

  • Machine floor scrubbing

    In Al Sinaiyah Al Qadimah we start with equipment made to vacuum metal particles and heavy debris before any other step.

  • Racking and high shelving

    Heavy oils and grease from repair shops are treated with industrial solutions before the final vacuum to ensure they are fully removed.

  • Around the machinery

    Heat from welding and heavy operations means we use equipment made specifically to handle harsh workshop conditions.

  • Industrial dust removed

    Floors may hold small dangerous metal shavings, so we clean them carefully with strong vacuum equipment and safe tools.

  • Loading bays

    Wide roads packed with truck traffic mean the shortest cleaning intervals to stop dust and debris piling up.

  • High level surfaces and gantries

    After cleaning we verify floors, corners and shelves to ensure no metal debris or oils remain.

The character of Al Sinaiyah Al Qadimah

Industrial area: workshops, warehouses and loading yards

Al Sinaiyah Al Qadimah is a pure industrial zone with metalworking, vehicle repair and storage, so each building needs its own assessment based on what industrial activity happens inside and what dust and oils result from it.

How we work

Site visit and survey

Agree the schedule

Work top to bottom

Inspect and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

Landmarks of Al Sinaiyah Al Qadimah

Crews schedule Al Sinaiyah Al Qadimah visits around peak industrial activity times in the workshops, moving between sites near King Faisal Road and storage buildings deeper in the zone, balancing visit speed with reducing impact on ongoing operations.

  • King Faisal Road
  • Al Kharj Road
  • the wider Al Sinaiyah industrial quarter

Other services in Al Sinaiyah Al Qadimah

The room and the building around it are on one list.

Nearby districts we cover

Questions before booking

Our workshop produces metal dust daily from cutting and welding, how do we manage it?
Daily or twice-weekly cleaning is needed for metalworking, cutting and welding shops. We use strong specialized vacuum equipment that removes fine metal particles before they settle everywhere.

The warehouse is next to a welding shop, does heat and dust damage equipment?
Yes, heat from welding and hot metal particles can damage standard equipment, so we clean carefully using tools made for heavy industrial settings that withstand heat.

Can you clean metal debris and heavy oils together?
Yes, warehouses beside repair shops hold oil and mixed metal debris, so we use a specialized solution that lifts both before the final vacuum.

Trucks stir up dust from the wide roads, how do we control it inside the workshop?
The wide roads bring constant dust, so we suggest light barriers or screens on main doors to reduce dust entry from the road.

Floors hold oils and metal residue that are hard to remove, how do you handle them?
Heavy oils and metal debris need special treatment before vacuuming. We use industrial solutions that break down oil and metal chips before removal.

How often should a workshop producing daily metal dust be cleaned?
Metal, cutting and welding shops need daily or twice-daily cleaning so dust and debris do not pile up, risking worker safety and damaging equipment.

How much does factory and warehouse cleaning in Al Sinaiyah Al Qadimah cost?
It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Sinaiyah Al Qadimah.

Need factory and warehouse cleaning in Al Sinaiyah Al Qadimah? Tell us about the place and we will tell you what it needs

We reach Al Sinaiyah Al Qadimah at a time we agree, and you get the full cost before we start.

Call us WhatsApp
Call WhatsApp