On site

Raghwat Al Janoub Maintenance and Cleaning

Marble grinding and crystallisation in Al-Jumum

Al-Jumum is a small town marking a historic stop on the old pilgrimage road between Makkah and Madinah, built around a mosque and fort with a traditional market at its heart, mixing residential homes with shop fronts facing the main road. Marble floors here blend domestic use with commercial traffic, so polishing must account for different wear patterns between a family kitchen and a shopfront constantly exposed to street dust and food residue.

Why grinding beats a surface polish

  • Shine from the stone, not a layer

    A surface polish shines for the first week, then flakes off at the doors and busy walkways.

  • Scratches removed, not hidden

    Deep scratches and sunken stains do not wipe away, because they sit inside the stone.

  • A surface that resists Riyadh dust

    Central Saudi dust is fine, mineral and constant, and it grinds against a soft polish all day until the shine dulls.

  • Edges and skirtings matched

    Many floor jobs leave the corners and skirtings dull, so the edge of every room gives the work away.

Why the job is different in Al-Jumum

Commercial shops facing the main road in Al-Jumum show heavier and faster dust buildup on marble than residential homes set back from the street, and food residue left by customers leaves marks that take longer to fade. The whole method is set out in our marble grinding and crystallisation guide.

  • Commercial shops and homes on one street front

    Al-Jumum mixes residential homes with commercial shops facing the main road, so marble in a shop sees daily customer traffic and street dust, while marble in the home next door might be inside a bedroom far from all that movement.

  • Road dust and constant traffic flow

    The main highway between Makkah and Madinah carries a steady stream of cars, buses and freight trucks, and fine dust slips through glass fronts and doors facing the road onto the marble faster than it reaches interior spaces in the same building.

  • Mixed commercial and residential use under one roof

    Many Al-Jumum buildings have a shop on the ground floor and a small flat or villa upstairs, so the shop's marble shows daily cleaning wear while the flat above it may not be cleaned as often. This means the polishing approach differs between the two levels.

What's Included

Al-Jumum sits on Wadi Fatimah and the main crossing between Makkah and Madinah, and constant traffic and foot traffic along the route bring dust and dirt toward shop fronts and glass-facing residential entrances that sit directly on the street.

  • The stone type and its condition read

    Heavy road dust from the main highway is checked first before we decide how hard to treat shop fronts facing the street.

  • Coarse grinding to take out the scratches

    Food marks and grease in commercial shops are handled separately before any general polishing of the surface begins.

  • Stepped through to the fine pads

    Marble in a shop and marble in the flat above it need different protective sealers based on how much each space is used.

  • Crystallisation for a hard surface

    Glass fronts of homes facing the road leave heavier dust that needs extra cleaning before any polishing can start.

  • Edges and skirtings

    A strong protective sealer is chosen for shops because the shine will wear down quickly from constant customer traffic.

  • A final seal on the pores

    After polishing a commercial shop, we leave a longer drying time and focus on setting the protection hard before customers return.

Landmarks of Al-Jumum

Polishing teams schedule their work around Mosque of Al-Fath, Asafan Fort, Majnah Market and the university campus, reaching shops on the main road and homes in quieter neighbourhoods inside the town with a plan that respects shop closing times.

  • Mosque of Al-Fath
  • Asafan Fort
  • Majnah Market
  • Wadi Fatimah
  • Umm Al-Qura University College

How we work

Survey the floor

Prepare the space

Grind and crystallise

Clean up and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

What is different about Makkah Region

Makkah Region reaches from the Red Sea coast at Jeddah, Rabigh, Al Lith and Al Qunfudhah to the holy city in its valley and up to Taif on the Hijaz escarpment. Jeddah's corniche towers, glass offices and the coral stone houses of Al Balad live in humid, salt laden air that films glass and pits metal. Makkah's hotel towers and marble courtyards stand in dry heat with constant pilgrim traffic and dust, while Taif's stone villas get fog, rain and cold nights on Al Hada. Salt residue and damp are the main enemies of stone and glass here.

Other services in Al-Jumum

The room and the building around it are on one list.

Nearby cities we cover

Questions before booking

Does main road dust affect how quickly dirt builds up on marble?

Yes, shops facing the main road collect heavier dust than homes set back inside, fine particles from traffic settle on marble faster, and need more cleaning before polishing can begin.

Is polishing in a shop different from the flat above it?

Yes, marble in a shop faces daily customer traffic and residue, so it needs stronger treatment and a harder-wearing sealer than quiet domestic marble sitting directly above it.

Food residue from customers leaves stains, how is that handled?

Food marks in commercial shops are treated with special care before polishing starts, we inspect them first and choose the right treatment based on the stain type, since grease needs a different approach from drink residue.

Does constant customer traffic make the polish wear away faster?

Yes, heavy daily traffic in a shop means the shine fades faster than in a quiet home, but the sealer we choose helps extend the polish lifespan even under heavy use.

Is polishing different in homes set back from the street?

Yes, marble away from the main road needs milder treatment because it is cleaner and sees less dust exposure, so we clean and polish based on the actual surface condition, not the heavy treatment we use for road-facing fronts.

Does timing affect when you polish, given the shops below?

Yes, we agree with shop owners on closing times or quiet hours to start work without disrupting daily business, and homes above shops are visited on a schedule that respects the shop traffic below.

How much does marble grinding and crystallisation in Al-Jumum cost?

It is set after we have seen the job, because the price follows the floor area, the type of stone and how deep the scratches and stains go. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al-Jumum.

Need marble grinding and crystallisation in Al-Jumum? Tell us about the place and we will tell you what it needs

We reach Al-Jumum at a time we agree, and you get the full cost before we start.

Call WhatsApp