On site

Raghwat Al Janoub Maintenance and Cleaning

Post-construction cleaning in Al Futah, Riyadh

Al Futah is a close-set historic district where new buildings stand beside heritage houses, leaving construction dust trapped in tight gaps between walls. Cleaning here demands care with narrow passages and shared stairs before residents move in. The mixed age of the buildings means each surface needs a different approach.

Why this is not routine cleaning

  • Build residue needs more than wiping

    Cement haze and silicone lines need a scraper and the right chemical for each surface, not a cloth.

  • The right order, top to bottom

    We start at the ceiling and high vents and work down to the floor, dry before wet.

  • Glass and marble handled with care

    Riyadh's mineral dust and the region's hard water leave calcium scale on glass that scratches if you scrub hard or leave it too long.

  • Vents cleared before first use

    Building dust drifts into AC outlets and vents and lodges in the filters, so the first time the unit runs it blows that dust through every room.

Why the job is different in Al Futah

Shared stairs in older buildings collect fine dust in corners rapidly, requiring repeated attention to small details during and after the main clean. The whole method is set out in the details of our post-construction cleaning service.

  • Narrow gaps between tightly-set old buildings

    Buildings crowded together in Al Futah leave very tight gaps that trap dust and fine sand. Brushes and brooms cannot reach inside easily, and the work needs specialist tools and cleaning solutions that reach deep corners without damaging old walls or mortar.

  • Mixed old and new floor surfaces throughout

    Al Futah contains heritage villas with traditional stonework and newer blocks with modern tile. Cement residue clings differently to each type, and strong products that clean modern tile can leave marks or discolour older surfaces, so the method must shift between rooms.

  • Shared stairs and dark internal corridors

    Shared passages and stairs between units are tight and poorly lit, making small debris hard to spot. Dust hides in corners and on treads, requiring careful hand-cleaning after the main dust removal to prevent scattered grains from resettling on freshly cleaned surfaces.

What's Included

The district contains heritage homes and apartment blocks set along narrow streets, making dust removal from tight internal gaps a complex task throughout the area.

  • Construction debris removed

    Debris trapped in tight gaps between closely-set buildings must be carefully sorted by hand before disposal to avoid missing fragments in corners.

  • Cement haze removed

    Cement film on heritage floors is removed with mild solvent and soft brushes to protect old tile and stonework from scratching or chemical damage.

  • Stickers and protective film stripped

    Stickers on old metal frames are scraped with care to avoid marking or gouging the aged metal, doors or decorative details.

  • Paint spots and silicone smears

    Silicone marks on old glass and metal frames are cleared with specialist solution applied gently, avoiding hard rubbing that could scratch.

  • Vents and outlets de-dusted

    Vents and outlets in narrow, dark passages are cleaned with soft brushes and dust extraction before wet cleaning to prevent dust spread.

  • Final polish of the surfaces

    Final polish focuses on the mixed floor surfaces, paying close attention to gaps and edges where older and newer sections meet.

The character of Al Futah

Historic district: close-set buildings, narrow lanes and ageing services

Historic status means cleaning is not just dust removal but understanding old structures and preserving them. Tight gaps and sensitive materials require different methods than modern districts use.

How we work

Site survey

Clear the debris

Strip residue and dust

Wash, polish and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

Landmarks of Al Futah

Al Futah stretches between King Saud Road and King Fahd Road, centred on the historic Al Futah Park. Cleaning begins from access points near the main roads and extends into the villas and blocks set back in the interior.

  • Al Futah Park
  • King Saud Road
  • King Fahd Road

Nearby districts we cover

Questions before booking

Do heritage homes in Al Futah need different treatment?

Yes. Al Futah's heritage houses contain old materials sensitive to strong solvents. We test any product first on a hidden area, using milder concentrations and hand-cleaning to protect original surfaces and mortar from damage or discolouration.

How do you reach very tight gaps between buildings?

Gaps between tightly-spaced buildings need narrow brushes and flexible tools. We remove dust in stages from top to bottom, then apply specialist liquids that reach corners without requiring the space to be emptied or widened.

What makes shared stairs in this quarter challenging?

Tight stairs cannot accommodate large equipment, and dust settles in cracks between old tiles. We clean manually, step by step, removing stubborn residue with care to leave no white marks or scratches on the stonework or ancient floor surfaces.

Are stickers on old windows harder to remove?

Stickers on old metal frames need patience. We apply mild solvent and scrape carefully to avoid scratching the metal, then wipe the remaining residue with a balanced solution that leaves no film behind.

How long does a heritage apartment block typically take?

A mid-size block with eight units usually needs two to three days. Shared stairs and passages take extra time because of the confined space and intricate details requiring hand attention throughout.

Can I move into a heritage villa straight after cleaning?

Yes, but we recommend leaving windows open for two hours to air the tight gaps between the building and perimeter walls. This removes any residual moisture and traces of cleaning products that may linger in confined spaces.

How much does post-construction cleaning in Al Futah cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Futah.

Need post-construction cleaning in Al Futah? Tell us about the place and we will tell you what it needs

We reach Al Futah at a time we agree, and you get the full cost before we start.

Call WhatsApp