Call us
On site

Raghwat Al Janoub Maintenance and Cleaning

Post-construction cleaning in Al Iskan, Riyadh

Al Iskan mixes villas, apartments and multi-unit blocks together, which means post-construction cleaning here differs completely from single-villa districts. Ground-floor shops with homes stacked above them generate diverse building residue and demand a separate work sequence for each level. The dust and silicone traces need stripping in the right order, or the flat above will recollect what the shop below just shed.

Call us WhatsApp

Why this is not routine cleaning

  • Build residue needs more than wiping

    Cement haze and silicone lines need a scraper and the right chemical for each surface, not a cloth.

  • The right order, top to bottom

    We start at the ceiling and high vents and work down to the floor, dry before wet.

  • Glass and marble handled with care

    Riyadh's mineral dust and the region's hard water leave calcium scale on glass that scratches if you scrub hard or leave it too long.

  • Vents cleared before first use

    Building dust drifts into AC outlets and vents and lodges in the filters, so the first time the unit runs it blows that dust through every room.

Why the job is different in Al Iskan

Ground-floor shops accumulate dense cement dust mixed with oily adhesive traces that cling differently to every surface type. Cleaning here is not only about smooth tiling; varied materials mean varied removal methods on the same site. The whole method is set out in our post-construction cleaning guide.

  • Shops and flats above need separate cleaning sequences

    Cleaning a commercial unit on the ground floor differs entirely from cleaning the apartment above it. The shop holds heavy cement dust, sticky adhesive residue and marks on thick shop glazing. The flat above it needs protection from falling grit and moisture. The shop must be cleaned first and sealed before work starts upstairs, or new dust will coat freshly cleaned surfaces in the apartment.

  • Shared facades and entries multiply the work

    When shops and flats share a building, external walls and common entrances become complex. Glazing on shop frontages carries protective film of different thicknesses. Metal entry doors bear paint marks from simultaneous building work at different levels. Shared stairs and passages collect debris from both the ground and upper floors, requiring careful sequence to avoid re-soiling.

  • Smooth and textured floors sit in the same building

    Ground-floor shops often have polished flooring, whilst flats above may have textured tiles or different ceramics altogether. Stripping cement and dust requires different care depending on surface type. Tight corners between a shop and the flat above it trap fine dust that is difficult to extract, and residue gets packed into joints.

What's Included

The district sits between the Eastern Ring Road and Kharj Road, with evident variety in building types. The mix of villas, apartments and commercial blocks raises the standard of work needed after construction finishes.

  • Construction debris removed

    Ground-floor commercial units shed heavier and more varied building debris than residential flats stacked above them, requiring staged debris removal.

  • Cement haze removed

    Cement film on smooth shop flooring needs specialist removal agents before the general wash can begin without redistributing fine dust.

  • Stickers and protective film stripped

    Protective film on shop window glass is more difficult to strip than domestic apartment windows because of thickness and adhesive strength.

  • Paint spots and silicone smears

    Paint marks and silicone traces appear on both metal shop doors and on shared building paintwork, requiring different chemical approaches for each surface.

  • Vents and outlets de-dusted

    Vents and roof outlets in shop ceilings carry more cement slurry than upper-floor outlets and need individual attention before mechanical systems are first used.

  • Final polish of the surfaces

    Final polishing of floors and glass is applied after each level has been surveyed separately to confirm all residue is actually removed.

The character of Al Iskan

Mixed district: shops at street level with homes above them

In this mixed district, cleaning a ground-floor shop differs fundamentally from the flat above it in every dimension: the cement left behind, humidity levels, glass and door types.

How we work

Site survey

Clear the debris

Strip residue and dust

Wash, polish and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

Landmarks of Al Iskan

Al Iskan sits between Kharj Road and the Eastern Ring Road, which makes access straightforward from multiple directions. Proximity to Al Yasmin Mall means newly finished shops in the district may need cleaning before handover to commercial tenants who will be trading immediately.

  • Kharj Road
  • Eastern Ring Road
  • Al Yasmin Mall
  • Higher Institute for Plastic Industries

Other services in Al Iskan

The room and the building around it are on one list.

Nearby districts we cover

Questions before booking

Should I clean the shop and flat together or separately?
Cleaning them together transfers grime from the shop to the flat. The shop should be cleaned first, dried completely and sealed, then the flat cleaned after. This protects the home from heavy cement dust that the ground-floor commercial unit sheds first.

Do shared stairs and passages need special treatment here?
Yes, common passages get dirty from both levels. They should be cleaned after the individual units are done, because dust falls into them during upper work. A final inspection of stairs and passages confirms they are clean before handover.

Does the building facade need different care in mixed districts?
Mixed facades carry cement dust from work at multiple heights. Shop glazing differs from residential windows. Removing protective film and stickers from each type needs different standards based on glass sensitivity and frame material.

Are the chemicals safe on both shop and flat surfaces?
The chemicals used are safe on glass, ceramics and new metal. But application strength differs by surface type. Thick shop glazing handles more aggressive removal than thinner apartment windows.

Does dust from the shop penetrate into the flat above during work?
Yes, if the flat doors are open whilst the shop is being cleaned. So we seal between units and open only shop windows, directing dust outward and not upward into the residence.

How long does cleaning a single shop and flat together usually take?
Duration depends on unit size and the number of windows and glass surfaces. A small shop with a flat above takes less time than a large shop with a three-bedroom flat. A site survey first gives an accurate time before work starts.

How much does post-construction cleaning in Al Iskan cost?
It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Iskan.

Need post-construction cleaning in Al Iskan? Tell us about the place and we will tell you what it needs

We reach Al Iskan at a time we agree, and you get the full cost before we start.

Call us WhatsApp
Call WhatsApp