On site

Raghwat Al Janoub Maintenance and Cleaning

Post-construction cleaning in Al Nada, Riyadh

Al Nada mixes apartments, villas and ground-floor shops in close proximity, so a finished unit often contains a shop below residential floors. This completely changes the cleaning order: work must begin from the top or highest floor to prevent dust from falling onto freshly cleaned spaces below, and to avoid contaminating the commercial ground floor as work progresses.

Why this is not routine cleaning

  • Build residue needs more than wiping

    Cement haze and silicone lines need a scraper and the right chemical for each surface, not a cloth.

  • The right order, top to bottom

    We start at the ceiling and high vents and work down to the floor, dry before wet.

  • Glass and marble handled with care

    Riyadh's mineral dust and the region's hard water leave calcium scale on glass that scratches if you scrub hard or leave it too long.

  • Vents cleared before first use

    Building dust drifts into AC outlets and vents and lodges in the filters, so the first time the unit runs it blows that dust through every room.

Why the job is different in Al Nada

Projects here often leave metal surfaces coated with cement and paint, requiring special treatment before any water-based cleaning begins. The whole method is set out in our notes on post-construction cleaning.

  • Shops below residential units need staged cleaning

    The ground-floor shop must be cleaned first before the residential units above, because dust falls from higher floors continuously. Work starts in the shop, then moves to the apartments and shared floors. Reversing this order leaves the commercial space accumulating dust again as work continues above.

  • Shared corridors and common areas demand precision

    Mixed-use buildings have shared passages between commercial and residential zones, which gather grime from both construction and worker movement. These need deep cleaning and special polishing because they mark boundaries between different space types and are seen by all users.

  • Ventilation and openings in close-built structures

    Closely spaced buildings reduce natural airflow, so dust becomes trapped longer inside the structures. Every window, door and ventilation opening must be opened carefully to clear internal dust thoroughly before the premises can be properly aired.

What's Included

The district sits between Abu Bakr As-Siddiq Road, Uthman ibn Affan Road and Thumamah Road, combining residential and commercial buildings in an interwoven layout.

  • Construction debris removed

    Mixed commercial and residential construction leaves varied debris: shops may contain metal dust while apartments hold cement and paint dust, each requiring different removal methods.

  • Cement haze removed

    Cement haze in enclosed, close-packed spaces accumulates more heavily than in open districts, requiring careful extraction from every corner and crevice.

  • Stickers and protective film stripped

    Stickers on shop windows, doors and glazed frontages need solvents that leave no residue on fresh paintwork, unlike purely residential surfaces.

  • Paint spots and silicone smears

    Paint spots and silicone smears appear on metal surfaces and storefronts as well as interior glass, not only in purely residential projects.

  • Vents and outlets de-dusted

    Air vents and technical openings in shared corridors must be de-dusted before central air systems are first run, to prevent recirculation of construction particles.

  • Final polish of the surfaces

    Final polishing of shops emphasises frontage and floor while apartments need both interior and exterior polish according to surface type.

Al Nada on the map

Al Nada sits about 2 km from Al Wadi and about 2.5 km from Al Rabie.

Open in Google Maps

How we work

Site survey

Clear the debris

Strip residue and dust

Wash, polish and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

Landmarks of Al Nada

Access to the district flows via Abu Bakr As-Siddiq Road from the east or Thumamah Road from the north, and these two entry points guide the scheduling of work based on each project's position within the mixed-use zone.

  • Abu Bakr As-Siddiq Road
  • Uthman ibn Affan Road
  • Thumamah Road

Nearby districts we cover

Questions before booking

Do you clean commercial shops and residences together?

Yes, but in a strict sequence. The ground-floor shop or lower space is cleaned first, then the upper apartments. Reversing this order causes dust to fall onto the cleaned commercial space and necessitate re-cleaning.

How long does a complete mixed-use project typically take?

Duration depends on total area, number of floors and finish quality. A project with one shop and two apartments may take two days; a larger mixed complex requires longer.

Do shared corridors need different treatment than individual units?

Yes, significantly. Corridors become soiled from every connected unit and must be deep-cleaned and polished to a higher standard because they are the building's public face and high-traffic zone.

Does a commercial space need different cleaning products than residential?

Usually the same products work, but if the shop contains payment terminals or specialist machinery, we inspect those to ensure they are protected during cleaning.

Can the shop and apartments be cleaned on different days?

Technically yes, but we recommend close-interval cleaning of the entire project to prevent dust migration between units and the need to re-clean the shop.

What should you prepare before we arrive?

Ensure all doors and windows are unlocked and accessible for ventilation during work. Tell us if furniture or equipment occupies any area that we need to avoid or protect.

How much does post-construction cleaning in Al Nada cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Nada.

Need post-construction cleaning in Al Nada? Tell us about the place and we will tell you what it needs

We reach Al Nada at a time we agree, and you get the full cost before we start.

Call WhatsApp