On site

Raghwat Al Janoub Maintenance and Cleaning

Post-construction cleaning in Al Sinaiyah Al Jadidah, Riyadh

Al Sinaiyah Al Jadidah is a zone of factories and warehouses, but new projects here are more complex than empty storage shells. They include administrative offices, control rooms, packing areas, each leaving different dust and requiring distinct handling based on the work it will eventually host and the machines or systems it will contain.

Why this is not routine cleaning

  • Build residue needs more than wiping

    Cement haze and silicone lines need a scraper and the right chemical for each surface, not a cloth.

  • The right order, top to bottom

    We start at the ceiling and high vents and work down to the floor, dry before wet.

  • Glass and marble handled with care

    Riyadh's mineral dust and the region's hard water leave calcium scale on glass that scratches if you scrub hard or leave it too long.

  • Vents cleared before first use

    Building dust drifts into AC outlets and vents and lodges in the filters, so the first time the unit runs it blows that dust through every room.

Why the job is different in Al Sinaiyah Al Jadidah

Industrial projects here leave metal and iron dust, some of it magnetic, layered beneath standard cement haze from construction. The whole method is set out in the details of our post-construction cleaning service.

  • Metal and industrial surfaces need specialist treatment

    A new warehouse or factory contains extensive metal surfaces: steel frames, bay doors, heavy equipment and structural steel. These hold fine ferrous particles that water and normal abrasion cannot remove, requiring specialist rust removers and industrial polishing products.

  • Industrial concrete floors are thick, hard and deeply stained

    Factory floors are thicker and harder than residential concrete, with cement marks that run deep into the surface. Cleaning demands strong mechanical scrubbing, specialist equipment and sometimes aggressive chemical treatment suited to industrial surfaces.

  • Different zones within one project demand different care

    A single industrial project may contain clean administrative zones and dusty production areas. Each requires distinct cleaning approaches and work sequencing tailored to its eventual function and contamination profile.

What's Included

The Second Industrial City sits near Kharj Road, surrounded by large factories, loading yards and heavy traffic routes carrying industrial vehicles.

  • Construction debris removed

    Industrial projects leave both metal and ferrous dust alongside standard cement, each type requiring different removal methods and specialist products for complete clearance.

  • Cement haze removed

    Metal dust and iron accumulate on metal surfaces differently than on concrete, demanding rust removers and chemical cleaning approaches distinct from standard methods.

  • Stickers and protective film stripped

    Stickers and protective film on heavy doors and equipment need strong solvents without leaving oily residue on bare iron and steel.

  • Paint spots and silicone smears

    Paint marks and silicone traces on metal frameworks and industrial surfaces may be thick and deeply embedded, particularly in factory settings.

  • Vents and outlets de-dusted

    Industrial ventilation outlets and technical openings may hold metal deposits and oil residues requiring deep cleaning before systems are first run.

  • Final polish of the surfaces

    Final polishing of metal surfaces focuses on removing light surface rust and protecting metals from future moisture and corrosion.

The character of Al Sinaiyah Al Jadidah

Industrial area: workshops, warehouses and loading yards

Industrial projects contain numerous complex metal surfaces and frameworks that require specialist cleaning and polishing plus post-cleaning protection, because metals become rust-prone rapidly once construction dust and contaminants are removed.

How we work

Site survey

Clear the debris

Strip residue and dust

Wash, polish and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

Landmarks of Al Sinaiyah Al Jadidah

Access is via Kharj Road or the Eastern Ring Road extension, and projects nearest the Second Industrial City are most complex because they sit amid ongoing industrial operations that continue to generate dust and contamination.

  • the Second Industrial City
  • Kharj Road
  • the Eastern Ring Road extension
  • Old Kharj Road

Nearby districts we cover

Questions before booking

How do you clean administrative offices inside a factory?

Offices need precise cleaning because they will house sensitive electronics. We use product-safe cleaners and avoid excess water or moisture that could affect future equipment.

Should metal surfaces be protected against rust after cleaning?

Yes, new iron and steel can be susceptible to moisture after cleaning. We may apply a light protective layer or oil depending on metal type and its intended use.

Is cleaning a warehouse different from cleaning a factory floor?

A warehouse may be empty or hold goods, while a factory contains production machinery. Cleaning differs based on equipment present and available working space.

Can areas be cleaned without halting later production?

Yes, we coordinate with management to clean specific zones without affecting future operations or allowing new dust to re-settle on finished areas.

Does industrial cement dust differ from ordinary construction dust?

Yes, industrial dust may contain metal particles and chemical compounds specific to the production process. Knowledge of factory type and operations is needed.

What if heavy equipment has not yet been moved to its final position?

We coordinate with the team to clean around machines carefully, or may delay cleaning areas beneath equipment until the machinery is positioned permanently.

How much does post-construction cleaning in Al Sinaiyah Al Jadidah cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Sinaiyah Al Jadidah.

Need post-construction cleaning in Al Sinaiyah Al Jadidah? Tell us about the place and we will tell you what it needs

We reach Al Sinaiyah Al Jadidah at a time we agree, and you get the full cost before we start.

Call WhatsApp