On site

Raghwat Al Janoub Maintenance and Cleaning

Post-construction cleaning in Al Taawun, Riyadh

Al Taawun is a mixed northern district bordered by the Northern Ring Road to the north and main roads on other sides, with residential villas and apartments amid varied facilities and services. After finishing, contractors leave cement dust and residue, but ongoing construction projects behind Al Arid and Al Qirawan blow dust northward on prevailing winds, and light coloured new finishes show this dust plainly.

Why this is not routine cleaning

  • Build residue needs more than wiping

    Cement haze and silicone lines need a scraper and the right chemical for each surface, not a cloth.

  • The right order, top to bottom

    We start at the ceiling and high vents and work down to the floor, dry before wet.

  • Glass and marble handled with care

    Riyadh's mineral dust and the region's hard water leave calcium scale on glass that scratches if you scrub hard or leave it too long.

  • Vents cleared before first use

    Building dust drifts into AC outlets and vents and lodges in the filters, so the first time the unit runs it blows that dust through every room.

Why the job is different in Al Taawun

Northern winds carry construction dust from new developments behind Al Arid and Al Qirawan, and light coloured new surfaces show this dust far more visibly than other districts. The whole method is set out in our full account of post-construction cleaning.

  • Northern winds carry construction dust from rear development projects

    Building works behind the district release fine dust that is carried northward by prevailing winds. This settles on new surfaces rapidly, particularly on light coloured frontages and glass facades that make dust visible to residents.

  • Hard blended water leaves scale plainly on light stone and glass

    The hard mixed supply water from the Riyadh network leaves white mineral deposits on glass after drying. Light facades and pale stone show these deposits visibly, creating a film that dulls the appearance unless removed completely.

  • Northern Ring Road traffic adds exhaust haze to construction dust

    The Northern Ring Road carries heavy traffic all day. Vehicle exhaust leaves a grey film on new glass and paint, combining with incoming construction dust to create layered contamination.

What's Included

The district is bordered by the Northern Ring Road to the north and organised main roads on other sides, positioned near ongoing building projects and new residential and commercial towers.

  • Construction debris removed

    Building debris is mixed with construction dust from rear projects, requiring careful sorting to prevent extra dust from spreading during removal.

  • Cement haze removed

    Cement dust mixed with northbound construction dust needs repeated vigorous washing to ensure complete removal from all surfaces.

  • Stickers and protective film stripped

    Stickers and protective film are removed carefully from light coloured surfaces to avoid leaving adhesive marks that gather dust.

  • Paint spots and silicone smears

    Paint spots and silicone marks on light facades need precise polishing to prevent hazing or uneven finishes.

  • Vents and outlets de-dusted

    Vents and outlets may hold dust accumulation from northerly winds carrying construction debris.

  • Final polish of the surfaces

    Polishing light coloured surfaces demands meticulous checking for mineral scale and construction dust residue.

Landmarks of Al Taawun

Al Taawun is directly bordered by the Northern Ring Road to the north, with Uthman ibn Affan Road to the east and Abu Bakr As-Siddiq Road to the west, making project locations easy to identify and access. Main roads provide straightforward routes to all residential units and local services throughout the district.

  • Northern Ring Road
  • Uthman ibn Affan Road
  • Abu Bakr As-Siddiq Road

How we work

Site survey

Clear the debris

Strip residue and dust

Wash, polish and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

What is different about North Riyadh

North Riyadh is where the capital has grown fastest. Along the Northern Ring Road and King Salman Road, districts such as Al Malqa, Hittin, Al Yasmin, Al Narjis and Al Sahafa are largely new villas in light render, stone and glass, while the King Abdullah Financial District and the towers around Riyadh Front add curtain wall glass and marble lobbies. Beyond Al Arid and Al Qirawan the plots are still being built, so cement dust and fine sand from the open desert towards Banban settle on every surface, and the hard blended supply water leaves scale on glass and stone.

Nearby districts we cover

Questions before booking

How do you handle dust from rear construction projects blowing northward?

Construction dust from new developments behind Al Arid and Al Qirawan requires repeated deep cleaning. We use intensive dust removal techniques to ensure no particles remain trapped on surfaces.

Do light coloured facades need special care from mineral scale?

Yes, pale glass and pale stone show mineral deposits plainly. Our polishing uses specialist solvents to remove scale deposits completely without leaving any residue or streaks.

When is the best time to clean to avoid rapid re-soiling from dust?

We choose periods of lighter winds and calm air. Early morning or late afternoon work when prevailing winds are weakest minimises dust resettlement after cleaning.

Do continuous construction projects behind Al Taawun affect cleaning quality?

Ongoing projects mean dust settles constantly, but our initial clean removes all existing residue. Light maintenance cleaning one week later sustains cleanliness effectively.

Does hard water scale affect new glass and stone surfaces here?

Yes, hard water leaves white deposits on glass and pale stone. Our polishing removes scale completely, though deposits may return as daily water use resumes.

Do large glass building facades fall within the cleaning scope?

Cleaning focuses on residential units and shared internal areas. Large external facades may require separate quotation and a different work plan if requested.

How much does post-construction cleaning in Al Taawun cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Taawun.

Need post-construction cleaning in Al Taawun? Tell us about the place and we will tell you what it needs

We reach Al Taawun at a time we agree, and you get the full cost before we start.

Call WhatsApp