On site

Raghwat Al Janoub Maintenance and Cleaning

Post-construction cleaning in Al Uraija Al Wusta, Riyadh

Al Uraija Al Wusta is a mixed district where shops sit at street level beneath residential flats, and new buildings here leave construction debris across both ground floor retail spaces and apartments above. Glass traps cement haze and protective film, and because the sports walkway runs nearby, opening a shop before cleaning requires special care to avoid fresh soiling from foot traffic and open ground.

Why this is not routine cleaning

  • Build residue needs more than wiping

    Cement haze and silicone lines need a scraper and the right chemical for each surface, not a cloth.

  • The right order, top to bottom

    We start at the ceiling and high vents and work down to the floor, dry before wet.

  • Glass and marble handled with care

    Riyadh's mineral dust and the region's hard water leave calcium scale on glass that scratches if you scrub hard or leave it too long.

  • Vents cleared before first use

    Building dust drifts into AC outlets and vents and lodges in the filters, so the first time the unit runs it blows that dust through every room.

Why the job is different in Al Uraija Al Wusta

Ground floor shops accumulate concentrated construction dust from shared lifts and staircases, requiring longer treatment of newly laid ceramic and tile surfaces than residential flats alone. The whole method is set out in our notes on post-construction cleaning.

  • Ground floor retail and shared entrances

    Shops and common entrances collect concentrated building dust from lifts and stairs more than flats do. Newly laid tile surfaces hold a complete cement layer that must be lifted before washing, otherwise the white haze lingers and darkens unevenly under traffic.

  • Wide glass facades and layered door sets

    Shops have large glass frontages and multiple door layers of metal and glass. Protective film stickers leave adhesive residue on glazing that does not wipe away, requiring separate chemical treatment to remove completely.

  • Narrow gaps and tight grout joints

    Grout lines in both shop and flat flooring trap fine sand and cement because they run deeper and tighter. Grout cleaning needs specialist tools that residential flats alone do not require, and must happen before any flood wash.

What's Included

The district lies within the Uraija cluster spreading across several residential blocks connected by organised streets, with open spaces surrounding the community park and sports walkway.

  • Construction debris removed

    Shops hold concentrated building waste from lift shafts and stairs; clearing starts with removing all visible debris from corners and tight joints before moving to surfaces.

  • Cement haze removed

    Cement haze settles faster in shops than flats because floor temperature runs higher; we remove it with fine misting before dry brushing and wet wiping.

  • Stickers and protective film stripped

    Protective film stickers on glass facades leave solid adhesive marks; we strip them with specialist solvent then wipe glazing with lint-free cloth to prevent streaks.

  • Paint spots and silicone smears

    Paint spots on metal shop doors and iron frames need gentle scraping then washing; silicone on glass is removed with soft plastic tools to prevent scratching.

  • Vents and outlets de-dusted

    Ventilation outlets and apertures in ceilings and walls are cleaned with soft brushes and extraction before washing begins, preventing settled dust falling back onto finished floors.

  • Final polish of the surfaces

    Final polish of new tile and stone happens with dry soft cloth after full washing is complete; glass and mirrors are wiped with specialist paper to prevent water marks.

Al Uraija Al Wusta on the map

Al Uraija Al Wusta sits about 1.5 km from Dhahrat Al Badiah and about 3 km from Al Uraija.

Open in Google Maps

How we work

Site survey

Clear the debris

Strip residue and dust

Wash, polish and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

The character of Al Uraija Al Wusta

Mixed district: shops at street level with homes above them

Shop and flat share the same entry, stairs and vents, but need entirely different treatment. Shop dust is more oily and polluted, the flat relatively cleaner. We sequence the work carefully so each unit stays protected from cross-contamination.

Nearby districts we cover

Questions before booking

Should a shop and flat above it be cleaned separately or together?

They are entirely separate. The shop receives ground level pollution from the street and shared entry, whilst the flat is sealed. We treat each independently and clean shared stairs and lobbies together with both units.

Are protective film sticker residues completely removed from the glazing?

Yes, but adhesive needs specialist solvent, not water and wiping alone. Fresh adhesive comes off more easily than aged, but if left for hours it hardens and becomes difficult to strip.

Does shop dust penetrate into the flat above during cleaning work?

Yes, if we clean the shop first without sealing vents. We sequence the work carefully: clean the flat first, seal its openings, then begin the shop and common areas.

What about vents and roof openings in the older shop ceiling?

Vents collect dust, threads and cement debris. We clean them with soft brushes and specialist tools before floor washing begins, otherwise the grit falls back onto clean surfaces.

Does proximity to the sports walkway require extra care before shop opening?

Yes, the walkway draws dust from gardens and grounds that reach the shop before our clean. We clean the external facade first and seal doors during internal work to prevent re-soiling.

How do we address cement and dust in tight shop corners and alcoves?

Corners under shelves and cabinets trap fine cement dust. We use soft scraping tools and small brushes to lift layers before flood washing, then clean the tools themselves to avoid residue transfer.

How much does post-construction cleaning in Al Uraija Al Wusta cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Uraija Al Wusta.

Need post-construction cleaning in Al Uraija Al Wusta? Tell us about the place and we will tell you what it needs

We reach Al Uraija Al Wusta at a time we agree, and you get the full cost before we start.

Call WhatsApp