On site

Raghwat Al Janoub Maintenance and Cleaning

Post-construction cleaning in Al Yarmouk, Riyadh

Al Yarmouk merges luxury villas, apartments and vacant plots, and its proximity to the Dahna sand belt means fine sand reaches the site on the wind and with every dust storm. Fresh finishes pick up a layer of cement dust mixed with fine desert sand on tiles and glass, a compound that needs dedicated removal before any washing begins.

Why this is not routine cleaning

  • Build residue needs more than wiping

    Cement haze and silicone lines need a scraper and the right chemical for each surface, not a cloth.

  • The right order, top to bottom

    We start at the ceiling and high vents and work down to the floor, dry before wet.

  • Glass and marble handled with care

    Riyadh's mineral dust and the region's hard water leave calcium scale on glass that scratches if you scrub hard or leave it too long.

  • Vents cleared before first use

    Building dust drifts into AC outlets and vents and lodges in the filters, so the first time the unit runs it blows that dust through every room.

Why the job is different in Al Yarmouk

New construction sites in Al Yarmouk leave mixed residue of cement and sand because the district sits on the eastern highway, and hard supply water leaves scale deposits on new glass. The whole method is set out in the post-construction cleaning overview.

  • Fine sand blended with cement dust

    In Al Yarmouk, fine desert sand enters the site on the air and with dust storms, mixing with cement dust on floors and glazing. This compound will not dissolve in water alone and leaves a stubborn grey-brown layer bonded to every surface.

  • Paint marks on glass and metal frames

    New villas and apartments in Al Yarmouk receive professional paintwork on metal frames and doors. Paint spray leaves fine residue on adjoining glass that dries hard and needs specialist solution to remove without scratching the new surface.

  • Vents and window tracks collecting sand

    Window tracks, vents and openings in villas and apartments trap deep deposits of fine sand. Before any window or opening is used, this sand must be cleared completely or it works into the walls and foundations.

What's Included

The district sits on the Dammam Road carrying heavy traffic, and its eastward exposure to open desert means sand and fine dust settle on new surfaces quickly and persistently.

  • Construction debris removed

    Clearing building debris from villas and apartments requires special attention because of multiple rooms and attached gardens. Sand collects in every corner and must be cleared before debris is removed.

  • Cement haze removed

    Cement dust mixed with desert sand forms a fine thick layer on tiles, marble and glass. This compound differs from pure cement dust and needs different solutions.

  • Stickers and protective film stripped

    Stickers on glass and new doors in Al Yarmouk bond hard because of sun and humidity. Stripping them takes patience and care to avoid scratching new glass.

  • Paint spots and silicone smears

    Paint marks on glass and metal frames are common in luxury villas because of professional paintwork. Removal needs specialist solutions and soft tools.

  • Vents and outlets de-dusted

    Vents and openings in new villas are full of sand and dust. Cleaning them before any opening is used is essential because sand will work into walls and foundations if left.

  • Final polish of the surfaces

    Final polishing of surfaces in luxury villas requires special care. Marble, stone and premium glass need specialist polish to restore the original sheen.

Landmarks of Al Yarmouk

Al Yarmouk extends from Jaber Al-Ahmad Al-Sabah Road to Dammam Road, and its nearness to Atyaf Mall helps us schedule work access and space for teams on new projects.

  • Al Yarmouk Park
  • Al Yarmouk Health Centre
  • Atyaf Mall
  • Jaber Al-Ahmad Al-Sabah Road
  • Dammam Road

How we work

Site survey

Clear the debris

Strip residue and dust

Wash, polish and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

What is different about East Riyadh

East Riyadh runs from King Abdullah Road and Khurais Road out past the eastern ring road towards Al Janadriyah. Al Rawdah, Al Naseem and Al Yarmuk are established districts of villas and mid rise apartment blocks, while Al Rimal, Al Munsiyah and Ishbiliyah are newer estates with more compact houses and lighter finishes. This side of the city faces the open desert and the sand belt of the Dahna, so it takes the first and heaviest share of every dust storm, and fine sand works into stairwells, balconies and window tracks all along the Dammam highway.

Nearby districts we cover

Questions before booking

Does desert sand enter the villa and flat during building or afterwards?

Sand enters throughout the build and after the finishes are done. Dust storms carry fine sand that settles on every new surface, and wind drives it into every opening and track.

How is cleaning a luxury villa different from a standard apartment here?

Luxury villas have more glass and more sensitive surfaces. Cleaning requires special care to avoid scratching premium glass and smooth stone floors.

Does hard water leave white marks on new glass?

Yes. The water from the supply in Al Yarmouk is hard and leaves white scale on glass if it dries on the surface. We use specialist scale remover after washing.

Can windows and doors be opened before cleaning finishes?

We do not recommend this. Opening windows before sand is cleared from tracks pushes sand inside and re-soils the surfaces already cleaned.

How many days does cleaning a large villa take after full construction?

A large villa with multiple rooms, a kitchen, and several bathrooms takes two to three days depending on finish level and residue volume.

Are protective stickers on new doors and windows easy to remove?

Stickers on new doors and windows are very sticky because sun and air have cured them. Stripping them takes multiple steps and care to avoid leaving adhesive traces.

How much does post-construction cleaning in Al Yarmouk cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Yarmouk.

Need post-construction cleaning in Al Yarmouk? Tell us about the place and we will tell you what it needs

We reach Al Yarmouk at a time we agree, and you get the full cost before we start.

Call WhatsApp