On site

Raghwat Al Janoub Maintenance and Cleaning

Post-construction cleaning in Siyah, Riyadh

Siyah is a residential district north of Utaiqah with mid-rise blocks on Al Bathaa Road and King Faisal Road. Sitting on busy main roads means construction dust mixes with vehicle exhaust, leaving a thicker grey film than in quieter quarters away from traffic flow.

Why this is not routine cleaning

  • Build residue needs more than wiping

    Cement haze and silicone lines need a scraper and the right chemical for each surface, not a cloth.

  • The right order, top to bottom

    We start at the ceiling and high vents and work down to the floor, dry before wet.

  • Glass and marble handled with care

    Riyadh's mineral dust and the region's hard water leave calcium scale on glass that scratches if you scrub hard or leave it too long.

  • Vents cleared before first use

    Building dust drifts into AC outlets and vents and lodges in the filters, so the first time the unit runs it blows that dust through every room.

Why the job is different in Siyah

Position on Al Bathaa Road and King Faisal Road means grey exhaust haze settles fast on glass and facades, and residue buildup here is denser and greasier than in sheltered areas. The whole method is set out in our post-construction cleaning guide.

  • Vehicle exhaust mixes with cement dust into a thick grey film

    Busy main roads around Siyah leave grey layers on glass and facades that are not only cement. This is a blend of cement, sand, oil and vehicle emissions. Removing it needs stronger solutions and careful work to leave no oily traces on fresh surfaces.

  • Glass shows contamination under protective stickers that hide the damage

    Protective film on glass and frames covers a layer of gritty residue underneath. Once film is stripped, the glass beneath appears dull and oily from weeks of traffic exhaust. An extra wash is needed right after stripping to clear this hidden layer.

  • Shared stairs and corridors collect tracked-in grit from the main road

    Shared passages in Siyah see constant foot traffic from the main road bringing new dust with every resident. Cleaning here means multiple passes to ensure all construction and road dust is gone, not just moved around.

What's Included

A residential district in west-central Riyadh within Al Shumaisi municipality, sitting north of Utaiqah, mostly mid-rise residential buildings with shops on its main streets.

  • Construction debris removed

    Siyah sits on busy main roads, and building debris here carries vehicle exhaust traces alongside cement dust. Clearing this requires specialist treatment for the heavy mixed grit.

  • Cement haze removed

    Cement dust in Siyah blends with oil and sand from the main road, and lifting it from tiles and glass needs solutions that leave no oily film after the wash.

  • Stickers and protective film stripped

    Protective stickers on glass and frames cover a dirty layer underneath; once stripped, the glass shows grey haze from exhaust buildup that needs an extra wash pass.

  • Paint spots and silicone smears

    Paint and silicone marks on frames near busy roads mix with grit and need specialist solvents to remove safely without damaging fresh paint or leaving residue.

  • Vents and outlets de-dusted

    Vents and outlet openings in stairs and passages collect heavy dust from both quarrying and main road traffic, so clearing them before use stops this grit spreading into flats.

  • Final polish of the surfaces

    Final polishing of tiles and glass in Siyah follows multiple wash passes to ensure every layer of grey exhaust film and dust is gone, leaving clear surfaces.

Landmarks of Siyah

Siyah lies between Al Bathaa Road and King Faisal Road, with building cleaning organised around access from these main routes. Equipment and water delivery runs from Al Bathaa Road, while waste and contaminated water disposal heads toward King Faisal Road.

  • Al Bathaa Road
  • King Faisal Road
  • Al Shumaisi Municipality building

How we work

Site survey

Clear the debris

Strip residue and dust

Wash, polish and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

What is different about Central Riyadh

Central Riyadh is the oldest and busiest part of the city. Olaya and Sulaimaniyah carry the office towers along King Fahd Road and Tahlia Street, including Kingdom Centre and Al Faisaliah, while Al Malaz, Al Murabba, Al Batha and Al Dirah are older apartment blocks with shops on the ground floor, the Masmak quarter and the markets around Qasr Al Hukm. Heavy traffic on the main roads coats glass and shopfronts in a grey exhaust film, older stairwells and tiled corridors show worn grout and scale from the hard water, and the commercial buildings never stop taking footfall.

Nearby districts we cover

Questions before booking

Does traffic exhaust from the main roads affect cleaning quality here?

Yes, the grey film on glass is a blend of cement, oil and exhaust. Removing it needs specialist solvents and extra washing, and grit can re-settle quickly if any cracks or crevices are missed.

What is the difference between grey and white dust on glass here?

White dust is hard water scale and cement salts. Grey dust is a mix of oil, sand and cement from vehicle emissions and quarrying. Each needs a different solvent to lift cleanly.

Do shared stairs in Siyah need more cleaning than in other quarters?

Yes, the King Faisal Road location means constant footfall from residents bringing street grit upstairs. Stairs need multiple passes and may require a refresh day after completion to hold cleanliness.

How many times is window glass washed after stripping protective film?

At least twice: immediately after film removal, and again after cleaning frames of paint and silicone residue. Glass next to main roads needs extra wash passes to clear all oily traces.

Can I move into the flat right after construction cleaning is done?

You can move in, but we suggest covering windows for the first days because grit from the main road settles fast. The busy road means dust will re-enter quickly without protection.

Does flat cleaning differ from cleaning shared stairs and passages here?

Yes, stairs and corridors face constant exhaust film and grit from the main road. They need stronger solutions and more specialist handling than sealed indoor flats away from traffic.

How much does post-construction cleaning in Siyah cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Siyah.

Need post-construction cleaning in Siyah? Tell us about the place and we will tell you what it needs

We reach Siyah at a time we agree, and you get the full cost before we start.

Call WhatsApp