On site

Raghwat Al Janoub Maintenance and Cleaning

Marble grinding and crystallisation in Al Wajh

Al-Wajh is a small Red Sea port town in Tabuk region with an old heritage quarter of stone houses, modern villas along the corniche and tourist hotels, each with marble floors directly exposed to sea moisture and salt. Marble here endures repeated cycles of high humidity, salt spray and hot air, making polishing more challenging and shorter-lived than in inland cities.

Why grinding beats a surface polish

  • Shine from the stone, not a layer

    A surface polish shines for the first week, then flakes off at the doors and busy walkways.

  • Scratches removed, not hidden

    Deep scratches and sunken stains do not wipe away, because they sit inside the stone.

  • A surface that resists Riyadh dust

    Central Saudi dust is fine, mineral and constant, and it grinds against a soft polish all day until the shine dulls.

  • Edges and skirtings matched

    Many floor jobs leave the corners and skirtings dull, so the edge of every room gives the work away.

Why the job is different in Al Wajh

In Al-Wajh we notice that marble in ground-level rooms and sea-facing spaces accumulates white salt spots far faster than floors in enclosed interior rooms. The whole method is set out in our full account of marble grinding and crystallisation.

  • Heritage old town with modern coastal villas

    Al-Wajh combines a heritage old quarter with historic stone buildings and straightforward marble, alongside modern corniche villas with finer marble floors. Old buildings mean rising moisture from beneath the foundations, while modern ones mean larger openings to hot air and sea salt spray.

  • Intense sea salt and humidity from direct Red Sea location

    Direct exposure to the Red Sea means very high humidity and salt spray carried on the air and in rare rain. This salt seeps under marble at high speed and leaves deep white spots.

  • Tourist use in hotels, bathhouses and pools near the shore

    Tourist hotels, public bathhouses and pools close to the sea have marble floors needing high durability. These buildings combine very high humidity with heavy use from tourists and visitors.

What's Included

Al-Wajh sits directly on the Red Sea coast with historic ports and Ottoman fortifications, and intense sea salt and coastal humidity penetrate marble floors rapidly through ventilation and openings, making marble protection essential before polishing.

  • The stone type and its condition read

    Al-Wajh is a Red Sea coastal city with villas, hotels and an old town, so each building type needs different treatment based on sea salt exposure.

  • Coarse grinding to take out the scratches

    White sea salt spots are extracted forcefully before any other treatment, as salt does not lift with plain water.

  • Stepped through to the fine pads

    Very strong preventive treatment is applied before grinding and crystallisation to protect marble from repeated sea salt exposure.

  • Crystallisation for a hard surface

    Rooms and spaces facing the sea directly need stronger preventive treatment than closed interior rooms.

  • Edges and skirtings

    Tourist hotels and bathhouses with very high humidity and heavy use need very short polishing cycles.

  • A final seal on the pores

    After crystallisation, we may need extra drying equipment in Al-Wajh because of high humidity from the sea.

Landmarks of Al Wajh

Work teams schedule visits around Al-Wajh Castle, the old town, the corniche and the port, so they reach coastal villas, hotels and heritage buildings without delays between appointments across the small city.

  • Al-Wajh Port
  • Al-Wajh Castle
  • Al-Wajh Old Town
  • Al-Wajh Corniche

How we work

Survey the floor

Prepare the space

Grind and crystallise

Clean up and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

What is different about Tabuk Region

Tabuk Region spans the far north west, from Tabuk city and the oasis of Tayma inland to Duba, Al Wajh, Umluj and Haql on the Red Sea and the Gulf of Aqaba. Inland winters are the coldest on the western side of the country, with frost, rain and occasional snow on Jabal Al Lawz, and rain runs the dust of a dry season down render and glass in long streaks. The coast is humid and salty, and its resort buildings and port facilities take a salt film that clouds glass and dulls polished stone.

Other services in Al Wajh

The room and the building around it are on one list.

Nearby cities we cover

Questions before booking

Our coastal villa floor has white sea salt spots, will polishing remove them?

White sea salt spots are treated directly before polishing starts, we extract the salt and clean the surface, then apply strong preventive treatment before grinding. But salt may return quickly in sea-facing areas.

Do tourist hotel floors need different treatment from villas?

Yes, hotels with very high humidity and heavy tourist traffic need stronger treatment and shorter polishing intervals than villas. We assess usage load and humidity in each hotel separately.

The old town has rising damp from below, will polish last?

Rising damp from the old town's foundations cuts polish lifespan. We apply strong preventive treatment before polishing, and may suggest treating the foundations first if possible.

High coastal humidity affects work speed, does drying take longer?

Yes, high coastal humidity extends drying time after polishing. We may need extra drying equipment in Al-Wajh more than in inland cities.

The room faces the sea directly, does it need special care?

Yes, rooms facing the sea directly are exposed to salt and humidity continuously. We apply very strong preventive treatment to these floors, and shorter polishing intervals are best.

Does Al-Wajh's coastal setting affect the choice of polish materials?

Yes, we use specialist polishing materials for high-salt coastal environments in Al-Wajh. These materials provide extra protection from salt and moisture because of the direct Red Sea location.

How much does marble grinding and crystallisation in Al Wajh cost?

It is set after we have seen the job, because the price follows the floor area, the type of stone and how deep the scratches and stains go. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Wajh.

Need marble grinding and crystallisation in Al Wajh? Tell us about the place and we will tell you what it needs

We reach Al Wajh at a time we agree, and you get the full cost before we start.

Call WhatsApp