Raghwat Al Janoub Maintenance and Cleaning
Marble grinding and crystallisation in Duba
Duba sits on the Red Sea coast south of NEOM, and villas and older houses along the waterfront and up on the raised Al-Qarfa plateau face intense humidity year-round and constant salt spray. Marble and natural stone erode fast here, and salt penetrates deep pores leaving permanent stains if not handled with careful technique designed for coastal exposure.
Why grinding beats a surface polish
-

Shine from the stone, not a layer
A surface polish shines for the first week, then flakes off at the doors and busy walkways.
-

Scratches removed, not hidden
Deep scratches and sunken stains do not wipe away, because they sit inside the stone.
-

A surface that resists Riyadh dust
Central Saudi dust is fine, mineral and constant, and it grinds against a soft polish all day until the shine dulls.
-

Edges and skirtings matched
Many floor jobs leave the corners and skirtings dull, so the edge of every room gives the work away.
Why the job is different in Duba
Duba's coastal floors suffer fast erosion and deep salt stains that ordinary grinding cannot remove, needing specialist chemical treatment before polishing can restore them. The whole method is set out in our notes on marble grinding and crystallisation.
-
Modern waterfront villas and old town houses
Duba has new villas on the seafront looking straight out at the port and ocean, and old town houses with heritage wood and stone that have weathered salt for centuries, so modern marble attacks faster from sea salt than old stone accustomed to it.
-
Intense humidity and salt penetrating deep
Duba's coastal air carries salt and moisture year-round, and salt penetrates deep into stone and marble pores, creating interior stains that only show up after damage sets in and become hard to remove once trapped inside.
-
Fast erosion and need for regular upkeep
Coastal floors in Duba erode quickly from salt and humidity, and without regular cleaning and polishing they risk permanent cracking and damage, so maintenance cycles are not optional but essential for survival of the stone.
What's Included
Duba is a port city with a cement works and desalination plant, so coastal humidity and salt penetrate deep into stone floors causing rapid damage that cannot be reversed without advanced treatment.
-
The stone type and its condition read
Floor inspection reveals salt stains beneath the surface that bare eyes cannot see without experience and technique.
-
Coarse grinding to take out the scratches
Specialist chemical treatment precedes grinding to dissolve salt deposits trapped deep in stone and marble pores.
-
Stepped through to the fine pads
Stone grinding requires special care on coastal floors to avoid worsening existing weakness from prior erosion.
-
Crystallisation for a hard surface
Crystal polishing seals deep pores and protects against new salt entering quickly.
-
Edges and skirtings
Villas on the direct waterfront need shorter maintenance cycles than houses on higher, less-exposed plateaus.
-
A final seal on the pores
Drying after polishing takes longer in high coastal humidity to ensure the crystal protection layer sets properly.
The character of Duba
Coastal area: high humidity and salt air through the year
Duba mixes modern villas on the waterfront with old Ottoman houses in the old town, so each building type needs completely different treatment in terms of grinding force and crystal protection strength.
How we work
Survey the floor
Prepare the space
Grind and crystallise
Clean up and hand over
Some of our work
Photos from our team's work.
Landmarks of Duba
Polishing crews navigate between sites near Duba Port, King Abdulaziz Fort, the waterfront and the raised Al-Qarfa plateau, scheduling visits by salt and humidity exposure levels to set different maintenance cycles for each location.
- Duba Port
- King Abdulaziz Fort
- Prince Fahd bin Sultan Mosque
- Duba Corniche
- Al-Mizan Park
Other services in Duba
The room and the building around it are on one list.