On site

Raghwat Al Janoub Maintenance and Cleaning

Post-construction cleaning in Al Khair, Riyadh

Al Khair is expanding rapidly between King Fahd Road and King Khalid Road, with cranes and excavators pushing dust and sand away from new plots every day. When the contractor finishes a villa or apartment, every surface is coated in a thick layer of building waste and fine cement powder blown from neighbouring sites still under construction.

Why this is not routine cleaning

  • Build residue needs more than wiping

    Cement haze and silicone lines need a scraper and the right chemical for each surface, not a cloth.

  • The right order, top to bottom

    We start at the ceiling and high vents and work down to the floor, dry before wet.

  • Glass and marble handled with care

    Riyadh's mineral dust and the region's hard water leave calcium scale on glass that scratches if you scrub hard or leave it too long.

  • Vents cleared before first use

    Building dust drifts into AC outlets and vents and lodges in the filters, so the first time the unit runs it blows that dust through every room.

Why the job is different in Al Khair

Fine dust from neighbouring construction sites enters new villas quickly, and cleaning windows and stone facades needs special care because cement marks become hard to remove once they dry and set. The whole method is set out in our notes on post-construction cleaning.

  • Dust drifting from active construction sites around

    In Al Khair, building goes on everywhere, and winds carry fine dust and sand from excavations and concrete mixers into newly finished villas. This dust enters through the smallest gap and settles fast on floors and furnishings, sticking to glass and aluminium in ways very different from stable residential areas where building has long stopped.

  • Stone and premium facades demand careful treatment

    Villas in Al Khair arrive with light stone facades and large glass panels, and cement that clings to them forms white spots that yellow with age. Scrubbing hard to remove these stains scratches the surface, so residue must be stripped before any washing can start.

  • Hard water deposits mark new glass immediately

    Riyadh water is hard and mineral rich, and when it dries on new glass it leaves white scale marks. In newly built areas where every surface is flat and fresh, these deposits stay highly visible and need specialised technique to remove without damaging the treated glass.

What's Included

Al Khair is a newly developing district with large luxury villa plots and vacant land between homes, meaning continuous building activity and construction dust settling on every new surface and freshly completed property.

  • Construction debris removed

    Building debris in Al Khair is heavy and very fine, and excavations nearby add fine sand that needs careful sorting before removal and disposal.

  • Cement haze removed

    Cement dust penetrates everything in new developments and clings to glass and ceramic hard because of light moisture left from the finishing trades.

  • Stickers and protective film stripped

    Stickers on new windows and doors come thick and tough, and leave sticky residue that special solvents must remove, not plain water.

  • Paint spots and silicone smears

    Paint spots and silicone traces from different suppliers vary in hardness, and cement spray during building leaves white marks on aluminium frames that are slow to shift.

  • Vents and outlets de-dusted

    Outlets and fans are clogged with fine dust, and running them before cleaning spreads this powder through every room and surface.

  • Final polish of the surfaces

    New ceramic is glossy beneath the building waste that hides its shine, and final polish needs tools that leave no marks on the delicate new finish.

Al Khair on the map

Al Khair sits about 3 km from Al Arid and about 6.5 km from Al Qairawan.

Open in Google Maps

How we work

Site survey

Clear the debris

Strip residue and dust

Wash, polish and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

What is different about North Riyadh

North Riyadh is where the capital has grown fastest. Along the Northern Ring Road and King Salman Road, districts such as Al Malqa, Hittin, Al Yasmin, Al Narjis and Al Sahafa are largely new villas in light render, stone and glass, while the King Abdullah Financial District and the towers around Riyadh Front add curtain wall glass and marble lobbies. Beyond Al Arid and Al Qirawan the plots are still being built, so cement dust and fine sand from the open desert towards Banban settle on every surface, and the hard blended supply water leaves scale on glass and stone.

Nearby districts we cover

Questions before booking

Should I wait until all nearby construction sites finish?

No, post-construction cleaning is done when your contractor finishes your home alone. Neighbouring sites may continue for months, but cleaning your home now ensures it is ready and pristine before dust from surrounding work builds up again.

Will dust from neighbouring sites return after cleaning?

Yes, dust will return as long as building continues around you, but our initial clean removes the deep layers that ordinary washing cannot shift. After that, simple weekly cleaning is enough to protect your home from fresh dust.

Does a new villa need cleaning before furniture moves in?

Absolutely. Building residue makes furniture dirty quickly and scratches new soft furnishings. A thorough clean before moving anything in saves you cleaning work later and protects your new belongings.

How does post-construction cleaning differ from routine cleaning?

Routine cleaning cleans the surface only. After construction, we strip layers first: cement, fine dust, stickers and silicone marks, then wash. Without these steps, washing alone is not enough.

Are the chemicals safe on new stone and glass?

We use products approved for occupied spaces and safe on new materials. The key is sequence: strip residue mechanically first, then wash gently after, never force the chemicals to do the work alone.

How long does a single villa take to clean?

Time depends on size and finish, ranging from one to two days for a large villa. We start with a site survey to gauge the effort needed and select the right equipment and approach.

How much does post-construction cleaning in Al Khair cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Khair.

Need post-construction cleaning in Al Khair? Tell us about the place and we will tell you what it needs

We reach Al Khair at a time we agree, and you get the full cost before we start.

Call WhatsApp