Call us
On site

Raghwat Al Janoub Maintenance and Cleaning

Water tank waterproofing in Al Bariyah, Riyadh

Al Bariyah is an industrial residential district adjoining the Second Industrial City, with heavy truck traffic coming and going daily. Tanks here serve factories, warehouses and workshops, and leaks affect foundations and tiled floors carrying production loads. Sealing stops water at source and preserves the strong foundations this sector depends on.

Call us WhatsApp

Why a tank needs sealing, not patching

  • Water you store stays stored

    A lined tank keeps the water it holds instead of feeding a slow leak into the slab.

  • The damp stain has a cause

    The wet patch on the ceiling or wall below a tank is the symptom, and the tank is usually the cause.

  • Safe to hold drinking water

    The materials we apply are rated for potable water, so the tank is safe to drink from once it is back in use.

  • Proven before you rely on it

    We do not hand a tank back on trust.

Why the job is different in Al Bariyah

Tanks above workshops and warehouses here shed water that pools on stone and industrial tiling, staining and weakening it. The whole method is set out in our water tank waterproofing guide.

  • Industrial floors require dry ground support

    Tiled workshop and warehouse floors rely on a dry, stable foundation. Water leaking from a tank raises the moisture level beneath the tiles, causing heave and cracking. Sealing the tank stops water reaching the foundation from the outset.

  • Heavy vehicles load pressure onto damp ground

    Machinery movement over tiled floors resting on damp ground causes uneven settlement and stress fractures. A leaking tank weakens the foundation bearing these loads. Sealing preserves ground strength under pressure.

  • Water pooling around warehouses triggers rust damage

    Seeping water collects around the warehouse base and any exposed metalwork. Rust weakens steel frames and equipment. Sealing cuts off the water source and protects against deterioration.

What's Included

Heavy vehicle movement and industrial tiled floors need dry foundations. A leaking tank sends water directly to the ground below.

  • Emptied and fully dried

    Very large industrial tanks need two or more days to drain completely and fully dry.

  • Cracks and leak points surveyed

    Small cracks and leaks show clearly in industrial settings when salts build up on surfaces.

  • Surface prepared before coating

    The damp surface must dry fully before coating, especially on huge industrial tanks.

  • Waterproofing applied in coats

    Coats apply in strict sequence with each layer drying before the next is added.

  • Full curing time

    Full curing on very large tanks may take three weeks or longer.

  • Fill test before handover

    Testing involves slow water rise with careful monitoring of ground and floor for any weakness.

Al Bariyah on the map

Al Bariyah sits about 3.5 km from Al Sinaiyah Al Jadidah and about 6 km from Al Mashael.

Open in Google Maps

How we work

Look at the tank

Drain and prepare

Apply and cure

Fill, test and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

Landmarks of Al Bariyah

Tanks near the Eastern Ring Road extension are straightforward to reach, whilst those near Wadi Al Sulay may need extra coordination to avoid disrupting truck flow in the yard.

  • the Second Industrial City
  • the Eastern Ring Road extension
  • Al Shaaf Street
  • Wadi Al Sulay

Other services in Al Bariyah

The room and the building around it are on one list.

Nearby districts we cover

Questions before booking

Cracking appeared on the floor below the warehouse tank. Does sealing fix it?
Existing cracks from dampness may need separate repair. Sealing stops the cause and prevents new cracking from forming.

The tiled floor needs stability for heavy equipment. Does water really affect it?
Damp ground subsides under heavy loads, shifting equipment out of position. Dry ground is essential here.

The warehouse tank is enormous. Does sealing take a very long time?
Very large tanks need longer to drain, dry and treat. Expect two to three weeks.

Can the tank be sealed while the warehouse operates normally?
The warehouse runs as usual. Only on the final fill test day do we need to pause water use briefly.

Rust marks appeared on the warehouse frame from dampness. Will sealing stop it?
Sealing stops new water leaking in. Existing rust may need separate treatment, but will not worsen afterwards.

Is the waterproofing material safe for industrial water tanks?
The material is approved for both industrial and residential tank use. Final testing confirms safety.

How much does water tank waterproofing in Al Bariyah cost?
It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Bariyah.

Need water tank waterproofing in Al Bariyah? Tell us about the place and we will tell you what it needs

We reach Al Bariyah at a time we agree, and you get the full cost before we start.

Call us WhatsApp
Call WhatsApp