On site

Raghwat Al Janoub Maintenance and Cleaning

Water tank waterproofing in Al Mashael, Riyadh

Al Mashael is a primarily industrial district in south Riyadh housing large warehouses and factories that depend on uninterrupted water supply. A leaking tank leaves oily grime and diesel soot on tiled floors and equipment. Clean stored water without loss is the foundation of reliable production. Full tank sealing stops both the water loss and the contamination at once.

Why a tank needs sealing, not patching

  • Water you store stays stored

    A lined tank keeps the water it holds instead of feeding a slow leak into the slab.

  • The damp stain has a cause

    The wet patch on the ceiling or wall below a tank is the symptom, and the tank is usually the cause.

  • Safe to hold drinking water

    The materials we apply are rated for potable water, so the tank is safe to drink from once it is back in use.

  • Proven before you rely on it

    We do not hand a tank back on trust.

Why the job is different in Al Mashael

Oily grime from workshops and diesel soot build up fast on tiled floors, and water seeping from the tank spreads these deposits and makes them much harder to clean. The whole method is set out in our full account of water tank waterproofing.

  • One tank serving factory and workshop together

    Al Mashael houses warehouses above and workshops and factories underneath. One tank serves them all, and seeping water runs down onto equipment and stock. A leak in an industrial zone is not just a housing issue but damages production equipment, stored goods and workplace safety.

  • Heavy lorry traffic and constant vibration

    Al Kharj Road and the Eastern Ring Road extension carry lorry traffic all day long. This relentless vibration speeds tank cracking. Al Mashael needs a sealed tank that can resist constant movement and daily structural stress.

  • Tiled floor and oil, soot and soil buildup

    Oily grime from workshops and sand from unpaved yards collect on the floor fast. Seeping water mixes this together and makes cleaning costly and difficult. Tank sealing stops excess water and protects the floor from accelerated contamination.

What's Included

An industrial district in south Riyadh served by the Eastern Ring Road extension and Second Ring Road, with warehouses, workshops and factories rather than family housing.

  • Emptied and fully dried

    Complete draining happens from the lower stopcocks or by large pump according to industrial tank size.

  • Cracks and leak points surveyed

    We survey the tank for cracks and weak spots, recording each leak point precisely to understand what caused the failure.

  • Surface prepared before coating

    The surface is cleaned completely of scale and oily deposits before sealing work begins.

  • Waterproofing applied in coats

    Material is applied across all tank walls in heavy coats to withstand the industrial demand and constant vibration stress.

  • Full curing time

    Curing takes the full time needed according to tank size and prevailing weather conditions.

  • Fill test before handover

    Before handover we fill the tank slowly and monitor it for many hours to confirm absolutely no seepage appears.

The character of Al Mashael

Industrial area: workshops, warehouses and loading yards

In an industrial zone, the tank does not serve a family but supports production operations. A leak is not just a housing problem but damages equipment, floors and the water supply used in production itself. Full sealing protects the entire industrial investment.

How we work

Look at the tank

Drain and prepare

Apply and cure

Fill, test and hand over

Some of our work

Photos from our team's work.

  • A tower elevation with clean reflective panels beside panels carrying dark streaks
  • Two technicians on ropes washing a faceted metal facade at night with a pressure lance
  • A crew on ropes midway down a blue glass tower topped by two masts
  • Three technicians on ropes above a curved glass roof over a building atrium
  • Five technicians on ropes cleaning the yellow and grey elevation of a medical building
  • Seven technicians in yellow helmets descending parallel ropes on aluminium cladding

What is different about South Riyadh

South Riyadh is the older, denser and more industrial side of the capital. Manfuhah, Al Shifa, Al Aziziyah, Al Dar Al Baida and Al Faisaliyah are closely built low rise blocks and small villas with shops, workshops and warehouses between them, the wholesale vegetable market sits in Al Aziziyah, and the industrial city and Al Kharj Road carry lorry traffic all day. Oily grime from workshops, diesel soot and soil from unpaved yards build up on ground floors, entrances and tiled floors faster than anywhere else in the city.

Nearby districts we cover

Questions before booking

The factory tank is enormous. Does sealing such a large tank take weeks?

A large tank takes longer but the process is the same: drain, dry and seal completely. We plan the work schedule around tank size and the factory's operating hours to minimise production stoppage.

Can the tank be sealed while the warehouse below operates normally?

Yes, draining and working on the tank above does not interrupt warehouse operations. The warehouse stays open and working throughout the sealing period.

Rust has appeared on the warehouse frame from dampness. Will sealing stop it?

Yes, tank sealing stops moisture entering from above. Warehouse frame members will dry after the leak stops, though existing rust may need separate treatment to prevent further spread.

Is the waterproofing material safe for water used in factory production?

Yes, the material is approved for drinking water and industrial use. Water seeping through the sealed tank walls is pure and safe for all factory applications.

The tiled floor is old and needs stability for heavy equipment. Does water really damage it?

Seeping water deepens existing floor problems and weakens joints. Tank sealing stops the moisture source and protects the floor from further deterioration and instability.

After sealing, how often should the tank be inspected in this industrial area?

Annual inspection is enough under normal conditions. But heavy traffic and constant vibration may need inspection every six months to catch stress early.

How much does water tank waterproofing in Al Mashael cost?

It is set after we have seen the job, because the price follows the size of the place, its condition and the time the work takes. Send a photo and a description on WhatsApp and we will give you an estimate before we reach Al Mashael.

Need water tank waterproofing in Al Mashael? Tell us about the place and we will tell you what it needs

We reach Al Mashael at a time we agree, and you get the full cost before we start.

Call WhatsApp